So, here we have:
1. The completed Gun Turret
2. The seat for the above based in black and just prior to drybrushing.
3. The Turret glued in place. As i don't want the LED to be seen, you can see here i've put a piece of tracing paper over the hole to diffuse the light.
4. The Turret sealed. With every LED i've sealed them in with a cover of Bacofoil. This is to prevent light escaping from gaps, through the plastic of the hull, or out through the clear engine part.
I've taped it all in place but, as its going to be hanging down for years, i've also superglued the tape to the plastic as i don't it unsticking in the future.